Struct bevy_math::f64::DMat4

#[repr(C)]
pub struct DMat4 {
    pub x_axis: DVec4,
    pub y_axis: DVec4,
    pub z_axis: DVec4,
    pub w_axis: DVec4,
}

A 4x4 column major matrix.

This 4x4 matrix type features convenience methods for creating and using affine transforms and perspective projections. If you are primarily dealing with 3D affine transformations considering using DAffine3 which is faster than a 4x4 matrix for some affine operations.

Affine transformations including 3D translation, rotation and scale can be created using methods such as Self::from_translation(), Self::from_quat(), Self::from_scale() and Self::from_scale_rotation_translation().

Orthographic projections can be created using the methods Self::orthographic_lh() for left-handed coordinate systems and Self::orthographic_rh() for right-handed systems. The resulting matrix is also an affine transformation.

The Self::transform_point3() and Self::transform_vector3() convenience methods are provided for performing affine transformations on 3D vectors and points. These multiply 3D inputs as 4D vectors with an implicit w value of 1 for points and 0 for vectors respectively. These methods assume that Self contains a valid affine transform.

Perspective projections can be created using methods such as Self::perspective_lh(), Self::perspective_infinite_lh() and Self::perspective_infinite_reverse_lh() for left-handed co-ordinate systems and Self::perspective_rh(), Self::perspective_infinite_rh() and Self::perspective_infinite_reverse_rh() for right-handed co-ordinate systems.

The resulting perspective project can be use to transform 3D vectors as points with perspective correction using the Self::project_point3() convenience method.

Fields

x_axis: DVec4

y_axis: DVec4

z_axis: DVec4

w_axis: DVec4

Implementations

impl DMat4

pub const ZERO: DMat4 = _

A 4x4 matrix with all elements set to 0.0.

pub const IDENTITY: DMat4 = _

A 4x4 identity matrix, where all diagonal elements are 1, and all off-diagonal elements are 0.

pub const NAN: DMat4 = _

All NAN:s.

pub const fn from_cols( x_axis: DVec4, y_axis: DVec4, z_axis: DVec4, w_axis: DVec4 ) -> DMat4

Creates a 4x4 matrix from four column vectors.

pub const fn from_cols_array(m: &[f64; 16]) -> DMat4

Creates a 4x4 matrix from a [f64; 16] array stored in column major order. If your data is stored in row major you will need to transpose the returned matrix.

pub const fn to_cols_array(&self) -> [f64; 16]

Creates a [f64; 16] array storing data in column major order. If you require data in row major order transpose the matrix first.

pub const fn from_cols_array_2d(m: &[[f64; 4]; 4]) -> DMat4

Creates a 4x4 matrix from a [[f64; 4]; 4] 4D array stored in column major order. If your data is in row major order you will need to transpose the returned matrix.

pub const fn to_cols_array_2d(&self) -> [[f64; 4]; 4]

Creates a [[f64; 4]; 4] 4D array storing data in column major order. If you require data in row major order transpose the matrix first.

pub const fn from_diagonal(diagonal: DVec4) -> DMat4

Creates a 4x4 matrix with its diagonal set to diagonal and all other entries set to 0.

pub fn from_scale_rotation_translation( scale: DVec3, rotation: DQuat, translation: DVec3 ) -> DMat4

Creates an affine transformation matrix from the given 3D scale, rotation and translation.

The resulting matrix can be used to transform 3D points and vectors. See Self::transform_point3() and Self::transform_vector3().

Panics

Will panic if rotation is not normalized when glam_assert is enabled.

pub fn from_rotation_translation(rotation: DQuat, translation: DVec3) -> DMat4

Creates an affine transformation matrix from the given 3D translation.

The resulting matrix can be used to transform 3D points and vectors. See Self::transform_point3() and Self::transform_vector3().

Panics

Will panic if rotation is not normalized when glam_assert is enabled.

pub fn to_scale_rotation_translation(&self) -> (DVec3, DQuat, DVec3)

Extracts scale, rotation and translation from self. The input matrix is expected to be a 3D affine transformation matrix otherwise the output will be invalid.

Panics

Will panic if the determinant of self is zero or if the resulting scale vector contains any zero elements when glam_assert is enabled.

pub fn from_quat(rotation: DQuat) -> DMat4

Creates an affine transformation matrix from the given rotation quaternion.

The resulting matrix can be used to transform 3D points and vectors. See Self::transform_point3() and Self::transform_vector3().

Panics

Will panic if rotation is not normalized when glam_assert is enabled.

pub fn from_mat3(m: DMat3) -> DMat4

Creates an affine transformation matrix from the given 3x3 linear transformation matrix.

The resulting matrix can be used to transform 3D points and vectors. See Self::transform_point3() and Self::transform_vector3().

pub fn from_translation(translation: DVec3) -> DMat4

Creates an affine transformation matrix from the given 3D translation.

The resulting matrix can be used to transform 3D points and vectors. See Self::transform_point3() and Self::transform_vector3().

pub fn from_axis_angle(axis: DVec3, angle: f64) -> DMat4

Creates an affine transformation matrix containing a 3D rotation around a normalized rotation axis of angle (in radians).

The resulting matrix can be used to transform 3D points and vectors. See Self::transform_point3() and Self::transform_vector3().

Panics

Will panic if axis is not normalized when glam_assert is enabled.

pub fn from_euler(order: EulerRot, a: f64, b: f64, c: f64) -> DMat4

Creates a affine transformation matrix containing a rotation from the given euler rotation sequence and angles (in radians).

The resulting matrix can be used to transform 3D points and vectors. See Self::transform_point3() and Self::transform_vector3().

pub fn from_rotation_x(angle: f64) -> DMat4

Creates an affine transformation matrix containing a 3D rotation around the x axis of angle (in radians).

The resulting matrix can be used to transform 3D points and vectors. See Self::transform_point3() and Self::transform_vector3().

pub fn from_rotation_y(angle: f64) -> DMat4

Creates an affine transformation matrix containing a 3D rotation around the y axis of angle (in radians).

The resulting matrix can be used to transform 3D points and vectors. See Self::transform_point3() and Self::transform_vector3().

pub fn from_rotation_z(angle: f64) -> DMat4

Creates an affine transformation matrix containing a 3D rotation around the z axis of angle (in radians).

The resulting matrix can be used to transform 3D points and vectors. See Self::transform_point3() and Self::transform_vector3().

pub fn from_scale(scale: DVec3) -> DMat4

Creates an affine transformation matrix containing the given 3D non-uniform scale.

The resulting matrix can be used to transform 3D points and vectors. See Self::transform_point3() and Self::transform_vector3().

Panics

Will panic if all elements of scale are zero when glam_assert is enabled.

pub const fn from_cols_slice(slice: &[f64]) -> DMat4

Creates a 4x4 matrix from the first 16 values in slice.

Panics

Panics if slice is less than 16 elements long.

pub fn write_cols_to_slice(self, slice: &mut [f64])

Writes the columns of self to the first 16 elements in slice.

Panics

Panics if slice is less than 16 elements long.

pub fn col(&self, index: usize) -> DVec4

Returns the matrix column for the given index.

Panics

Panics if index is greater than 3.

pub fn col_mut(&mut self, index: usize) -> &mut DVec4

Returns a mutable reference to the matrix column for the given index.

Panics

Panics if index is greater than 3.

pub fn row(&self, index: usize) -> DVec4

Returns the matrix row for the given index.

Panics

Panics if index is greater than 3.

pub fn is_finite(&self) -> bool

Returns true if, and only if, all elements are finite. If any element is either NaN, positive or negative infinity, this will return false.

pub fn is_nan(&self) -> bool

Returns true if any elements are NaN.

pub fn transpose(&self) -> DMat4

Returns the transpose of self.

pub fn determinant(&self) -> f64

Returns the determinant of self.

pub fn inverse(&self) -> DMat4

Returns the inverse of self.

If the matrix is not invertible the returned matrix will be invalid.

Panics

Will panic if the determinant of self is zero when glam_assert is enabled.

pub fn look_to_lh(eye: DVec3, dir: DVec3, up: DVec3) -> DMat4

Creates a left-handed view matrix using a camera position, an up direction, and a facing direction.

For a view coordinate system with +X=right, +Y=up and +Z=forward.

pub fn look_to_rh(eye: DVec3, dir: DVec3, up: DVec3) -> DMat4

Creates a right-handed view matrix using a camera position, an up direction, and a facing direction.

For a view coordinate system with +X=right, +Y=up and +Z=back.

pub fn look_at_lh(eye: DVec3, center: DVec3, up: DVec3) -> DMat4

Creates a left-handed view matrix using a camera position, an up direction, and a focal point. For a view coordinate system with +X=right, +Y=up and +Z=forward.

Panics

Will panic if up is not normalized when glam_assert is enabled.

pub fn look_at_rh(eye: DVec3, center: DVec3, up: DVec3) -> DMat4

Creates a right-handed view matrix using a camera position, an up direction, and a focal point. For a view coordinate system with +X=right, +Y=up and +Z=back.

Panics

Will panic if up is not normalized when glam_assert is enabled.

pub fn perspective_rh_gl( fov_y_radians: f64, aspect_ratio: f64, z_near: f64, z_far: f64 ) -> DMat4

Creates a right-handed perspective projection matrix with [-1,1] depth range. This is the same as the OpenGL gluPerspective function. See https://www.khronos.org/registry/OpenGL-Refpages/gl2.1/xhtml/gluPerspective.xml

pub fn perspective_lh( fov_y_radians: f64, aspect_ratio: f64, z_near: f64, z_far: f64 ) -> DMat4

Creates a left-handed perspective projection matrix with [0,1] depth range.

Panics

Will panic if z_near or z_far are less than or equal to zero when glam_assert is enabled.

pub fn perspective_rh( fov_y_radians: f64, aspect_ratio: f64, z_near: f64, z_far: f64 ) -> DMat4

Creates a right-handed perspective projection matrix with [0,1] depth range.

Panics

Will panic if z_near or z_far are less than or equal to zero when glam_assert is enabled.

pub fn perspective_infinite_lh( fov_y_radians: f64, aspect_ratio: f64, z_near: f64 ) -> DMat4

Creates an infinite left-handed perspective projection matrix with [0,1] depth range.

Panics

Will panic if z_near is less than or equal to zero when glam_assert is enabled.

pub fn perspective_infinite_reverse_lh( fov_y_radians: f64, aspect_ratio: f64, z_near: f64 ) -> DMat4

Creates an infinite left-handed perspective projection matrix with [0,1] depth range.

Panics

Will panic if z_near is less than or equal to zero when glam_assert is enabled.

pub fn perspective_infinite_rh( fov_y_radians: f64, aspect_ratio: f64, z_near: f64 ) -> DMat4

Creates an infinite right-handed perspective projection matrix with [0,1] depth range.

pub fn perspective_infinite_reverse_rh( fov_y_radians: f64, aspect_ratio: f64, z_near: f64 ) -> DMat4

Creates an infinite reverse right-handed perspective projection matrix with [0,1] depth range.

pub fn orthographic_rh_gl( left: f64, right: f64, bottom: f64, top: f64, near: f64, far: f64 ) -> DMat4

Creates a right-handed orthographic projection matrix with [-1,1] depth range. This is the same as the OpenGL glOrtho function in OpenGL. See https://www.khronos.org/registry/OpenGL-Refpages/gl2.1/xhtml/glOrtho.xml

pub fn orthographic_lh( left: f64, right: f64, bottom: f64, top: f64, near: f64, far: f64 ) -> DMat4

Creates a left-handed orthographic projection matrix with [0,1] depth range.

pub fn orthographic_rh( left: f64, right: f64, bottom: f64, top: f64, near: f64, far: f64 ) -> DMat4

Creates a right-handed orthographic projection matrix with [0,1] depth range.

pub fn project_point3(&self, rhs: DVec3) -> DVec3

Transforms the given 3D vector as a point, applying perspective correction.

This is the equivalent of multiplying the 3D vector as a 4D vector where w is 1.0. The perspective divide is performed meaning the resulting 3D vector is divided by w.

This method assumes that self contains a projective transform.

pub fn transform_point3(&self, rhs: DVec3) -> DVec3

Transforms the given 3D vector as a point.

This is the equivalent of multiplying the 3D vector as a 4D vector where w is 1.0.

This method assumes that self contains a valid affine transform. It does not perform a perspective divide, if self contains a perspective transform, or if you are unsure, the Self::project_point3() method should be used instead.

Panics

Will panic if the 3rd row of self is not (0, 0, 0, 1) when glam_assert is enabled.

pub fn transform_vector3(&self, rhs: DVec3) -> DVec3

Transforms the give 3D vector as a direction.

This is the equivalent of multiplying the 3D vector as a 4D vector where w is 0.0.

This method assumes that self contains a valid affine transform.

Panics

Will panic if the 3rd row of self is not (0, 0, 0, 1) when glam_assert is enabled.

pub fn mul_vec4(&self, rhs: DVec4) -> DVec4

Transforms a 4D vector.

pub fn mul_mat4(&self, rhs: &DMat4) -> DMat4

Multiplies two 4x4 matrices.

pub fn add_mat4(&self, rhs: &DMat4) -> DMat4

Adds two 4x4 matrices.

pub fn sub_mat4(&self, rhs: &DMat4) -> DMat4

Subtracts two 4x4 matrices.

pub fn mul_scalar(&self, rhs: f64) -> DMat4

Multiplies a 4x4 matrix by a scalar.

pub fn div_scalar(&self, rhs: f64) -> DMat4

Divides a 4x4 matrix by a scalar.

pub fn abs_diff_eq(&self, rhs: DMat4, max_abs_diff: f64) -> bool

Returns true if the absolute difference of all elements between self and rhs is less than or equal to max_abs_diff.

This can be used to compare if two matrices contain similar elements. It works best when comparing with a known value. The max_abs_diff that should be used used depends on the values being compared against.

For more see comparing floating point numbers.

pub fn abs(&self) -> DMat4

Takes the absolute value of each element in self

pub fn as_mat4(&self) -> Mat4

Trait Implementations

impl Add for DMat4

type Output = DMat4

The resulting type after applying the + operator.

fn add(self, rhs: DMat4) -> <DMat4 as Add>::Output

Performs the + operation.

impl AddAssign for DMat4

fn add_assign(&mut self, rhs: DMat4)

Performs the += operation.

impl AsMut<[f64; 16]> for DMat4

fn as_mut(&mut self) -> &mut [f64; 16]

Converts this type into a mutable reference of the (usually inferred) input type.

impl AsRef<[f64; 16]> for DMat4

fn as_ref(&self) -> &[f64; 16]

Converts this type into a shared reference of the (usually inferred) input type.

impl Clone for DMat4

fn clone(&self) -> DMat4

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DMat4

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for DMat4

fn default() -> DMat4

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for DMat4

fn deserialize<D>( deserializer: D ) -> Result<DMat4, <D as Deserializer<'de>>::Error>

where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Display for DMat4

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Div<f64> for DMat4

type Output = DMat4

The resulting type after applying the / operator.

fn div(self, rhs: f64) -> <DMat4 as Div<f64>>::Output

Performs the / operation.

impl DivAssign<f64> for DMat4

fn div_assign(&mut self, rhs: f64)

Performs the /= operation.

impl From<DAffine3> for DMat4

fn from(m: DAffine3) -> DMat4

Converts to this type from the input type.

impl FromReflect for DMat4

where DMat4: Any + Send + Sync, DVec4: FromReflect + TypePath + RegisterForReflection,

fn from_reflect(reflect: &(dyn Reflect + 'static)) -> Option<DMat4>

Constructs a concrete instance of Self from a reflected value.

fn take_from_reflect( reflect: Box<dyn Reflect> ) -> Result<Self, Box<dyn Reflect>>

Attempts to downcast the given value to Self using, constructing the value using from_reflect if that fails.

impl GetTypeRegistration for DMat4

where DMat4: Any + Send + Sync, DVec4: FromReflect + TypePath + RegisterForReflection,

fn get_type_registration() -> TypeRegistration

Returns the default TypeRegistration for this type.

fn register_type_dependencies(registry: &mut TypeRegistry)

Registers other types needed by this type.

impl Mul<DAffine3> for DMat4

type Output = DMat4

The resulting type after applying the * operator.

fn mul(self, rhs: DAffine3) -> <DMat4 as Mul<DAffine3>>::Output

Performs the * operation.

impl Mul<DMat4> for DAffine3

type Output = DMat4

The resulting type after applying the * operator.

fn mul(self, rhs: DMat4) -> <DAffine3 as Mul<DMat4>>::Output

Performs the * operation.

impl Mul<DVec4> for DMat4

type Output = DVec4

The resulting type after applying the * operator.

fn mul(self, rhs: DVec4) -> <DMat4 as Mul<DVec4>>::Output

Performs the * operation.

impl Mul<f64> for DMat4

type Output = DMat4

The resulting type after applying the * operator.

fn mul(self, rhs: f64) -> <DMat4 as Mul<f64>>::Output

Performs the * operation.

impl Mul for DMat4

type Output = DMat4

The resulting type after applying the * operator.

fn mul(self, rhs: DMat4) -> <DMat4 as Mul>::Output

Performs the * operation.

impl MulAssign<f64> for DMat4

fn mul_assign(&mut self, rhs: f64)

Performs the *= operation.

impl MulAssign for DMat4

fn mul_assign(&mut self, rhs: DMat4)

Performs the *= operation.

impl Neg for DMat4

type Output = DMat4

The resulting type after applying the - operator.

fn neg(self) -> <DMat4 as Neg>::Output

Performs the unary - operation.

impl PartialEq for DMat4

fn eq(&self, rhs: &DMat4) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> Product<&'a DMat4> for DMat4

fn product<I>(iter: I) -> DMat4

where I: Iterator<Item = &'a DMat4>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for DMat4

fn product<I>(iter: I) -> DMat4

where I: Iterator<Item = DMat4>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Reflect for DMat4

where DMat4: Any + Send + Sync, DVec4: FromReflect + TypePath + RegisterForReflection,

fn get_represented_type_info(&self) -> Option<&'static TypeInfo>

Returns the TypeInfo of the type represented by this value.

fn into_any(self: Box<DMat4>) -> Box<dyn Any>

Returns the value as a Box<dyn Any>.

fn as_any(&self) -> &(dyn Any + 'static)

Returns the value as a &dyn Any.

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Returns the value as a &mut dyn Any.

fn into_reflect(self: Box<DMat4>) -> Box<dyn Reflect>

Casts this type to a boxed reflected value.

fn as_reflect(&self) -> &(dyn Reflect + 'static)

Casts this type to a reflected value.

fn as_reflect_mut(&mut self) -> &mut (dyn Reflect + 'static)

Casts this type to a mutable reflected value.

fn clone_value(&self) -> Box<dyn Reflect>

Clones the value as a Reflect trait object.

fn set(&mut self, value: Box<dyn Reflect>) -> Result<(), Box<dyn Reflect>>

Performs a type-checked assignment of a reflected value to this value.

fn try_apply( &mut self, value: &(dyn Reflect + 'static) ) -> Result<(), ApplyError>

Tries to apply a reflected value to this value.

fn reflect_kind(&self) -> ReflectKind

Returns a zero-sized enumeration of “kinds” of type.

fn reflect_ref(&self) -> ReflectRef<'_>

Returns an immutable enumeration of “kinds” of type.

fn reflect_mut(&mut self) -> ReflectMut<'_>

Returns a mutable enumeration of “kinds” of type.

fn reflect_owned(self: Box<DMat4>) -> ReflectOwned

Returns an owned enumeration of “kinds” of type.

fn reflect_partial_eq(&self, value: &(dyn Reflect + 'static)) -> Option<bool>

Returns a “partial equality” comparison result.

fn debug(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Debug formatter for the value.

fn apply(&mut self, value: &(dyn Reflect + 'static))

Applies a reflected value to this value.

fn reflect_hash(&self) -> Option<u64>

Returns a hash of the value (which includes the type).

fn serializable(&self) -> Option<Serializable<'_>>

Returns a serializable version of the value.

fn is_dynamic(&self) -> bool

Indicates whether or not this type is a dynamic type.

impl Serialize for DMat4

fn serialize<S>( &self, serializer: S ) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>

where S: Serializer,

Serialize this value into the given Serde serializer.

impl Struct for DMat4

where DMat4: Any + Send + Sync, DVec4: FromReflect + TypePath + RegisterForReflection,

fn field(&self, name: &str) -> Option<&(dyn Reflect + 'static)>

Returns a reference to the value of the field named name as a &dyn Reflect.

fn field_mut(&mut self, name: &str) -> Option<&mut (dyn Reflect + 'static)>

Returns a mutable reference to the value of the field named name as a &mut dyn Reflect.

fn field_at(&self, index: usize) -> Option<&(dyn Reflect + 'static)>

Returns a reference to the value of the field with index index as a &dyn Reflect.

fn field_at_mut(&mut self, index: usize) -> Option<&mut (dyn Reflect + 'static)>

Returns a mutable reference to the value of the field with index index as a &mut dyn Reflect.

fn name_at(&self, index: usize) -> Option<&str>

Returns the name of the field with index index.

fn field_len(&self) -> usize

Returns the number of fields in the struct.

fn iter_fields(&self) -> FieldIter<'_>

Returns an iterator over the values of the reflectable fields for this struct.

fn clone_dynamic(&self) -> DynamicStruct

Clones the struct into a DynamicStruct.

impl Sub for DMat4

type Output = DMat4

The resulting type after applying the - operator.

fn sub(self, rhs: DMat4) -> <DMat4 as Sub>::Output

Performs the - operation.

impl SubAssign for DMat4

fn sub_assign(&mut self, rhs: DMat4)

Performs the -= operation.

impl<'a> Sum<&'a DMat4> for DMat4

fn sum<I>(iter: I) -> DMat4

where I: Iterator<Item = &'a DMat4>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for DMat4

fn sum<I>(iter: I) -> DMat4

where I: Iterator<Item = DMat4>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl TypePath for DMat4

where DMat4: Any + Send + Sync,

fn type_path() -> &'static str

Returns the fully qualified path of the underlying type.

fn short_type_path() -> &'static str

Returns a short, pretty-print enabled path to the type.

fn type_ident() -> Option<&'static str>

Returns the name of the type, or None if it is anonymous.

fn crate_name() -> Option<&'static str>

Returns the name of the crate the type is in, or None if it is anonymous.

fn module_path() -> Option<&'static str>

Returns the path to the module the type is in, or None if it is anonymous.

impl Typed for DMat4

where DMat4: Any + Send + Sync, DVec4: FromReflect + TypePath + RegisterForReflection,

fn type_info() -> &'static TypeInfo

Returns the compile-time info for the underlying type.

impl Zeroable for DMat4

fn zeroed() -> Self

Calls zeroed.

impl Copy for DMat4

impl Pod for DMat4