Struct glam::f64::DQuat

source ·
#[repr(C)]
pub struct DQuat { pub x: f64, pub y: f64, pub z: f64, pub w: f64, }
Expand description

A quaternion representing an orientation.

This quaternion is intended to be of unit length but may denormalize due to floating point “error creep” which can occur when successive quaternion operations are applied.

Fields§

§x: f64§y: f64§z: f64§w: f64

Implementations§

source§

impl DQuat

source

pub const IDENTITY: Self = _

The identity quaternion. Corresponds to no rotation.

source

pub const NAN: Self = _

All NANs.

source

pub const fn from_xyzw(x: f64, y: f64, z: f64, w: f64) -> Self

Creates a new rotation quaternion.

This should generally not be called manually unless you know what you are doing. Use one of the other constructors instead such as identity or from_axis_angle.

from_xyzw is mostly used by unit tests and serde deserialization.

§Preconditions

This function does not check if the input is normalized, it is up to the user to provide normalized input or to normalized the resulting quaternion.

source

pub const fn from_array(a: [f64; 4]) -> Self

Creates a rotation quaternion from an array.

§Preconditions

This function does not check if the input is normalized, it is up to the user to provide normalized input or to normalized the resulting quaternion.

source

pub const fn from_vec4(v: DVec4) -> Self

Creates a new rotation quaternion from a 4D vector.

§Preconditions

This function does not check if the input is normalized, it is up to the user to provide normalized input or to normalized the resulting quaternion.

source

pub fn from_slice(slice: &[f64]) -> Self

Creates a rotation quaternion from a slice.

§Preconditions

This function does not check if the input is normalized, it is up to the user to provide normalized input or to normalized the resulting quaternion.

§Panics

Panics if slice length is less than 4.

source

pub fn write_to_slice(self, slice: &mut [f64])

Writes the quaternion to an unaligned slice.

§Panics

Panics if slice length is less than 4.

source

pub fn from_axis_angle(axis: DVec3, angle: f64) -> Self

Create a quaternion for a normalized rotation axis and angle (in radians).

The axis must be a unit vector.

§Panics

Will panic if axis is not normalized when glam_assert is enabled.

source

pub fn from_scaled_axis(v: DVec3) -> Self

Create a quaternion that rotates v.length() radians around v.normalize().

from_scaled_axis(Vec3::ZERO) results in the identity quaternion.

source

pub fn from_rotation_x(angle: f64) -> Self

Creates a quaternion from the angle (in radians) around the x axis.

source

pub fn from_rotation_y(angle: f64) -> Self

Creates a quaternion from the angle (in radians) around the y axis.

source

pub fn from_rotation_z(angle: f64) -> Self

Creates a quaternion from the angle (in radians) around the z axis.

source

pub fn from_euler(euler: EulerRot, a: f64, b: f64, c: f64) -> Self

Creates a quaternion from the given Euler rotation sequence and the angles (in radians).

source

pub fn from_mat3(mat: &DMat3) -> Self

Creates a quaternion from a 3x3 rotation matrix.

source

pub fn from_mat4(mat: &DMat4) -> Self

Creates a quaternion from a 3x3 rotation matrix inside a homogeneous 4x4 matrix.

source

pub fn from_rotation_arc(from: DVec3, to: DVec3) -> Self

Gets the minimal rotation for transforming from to to. The rotation is in the plane spanned by the two vectors. Will rotate at most 180 degrees.

The inputs must be unit vectors.

from_rotation_arc(from, to) * from ≈ to.

For near-singular cases (from≈to and from≈-to) the current implementation is only accurate to about 0.001 (for f32).

§Panics

Will panic if from or to are not normalized when glam_assert is enabled.

source

pub fn from_rotation_arc_colinear(from: DVec3, to: DVec3) -> Self

Gets the minimal rotation for transforming from to either to or -to. This means that the resulting quaternion will rotate from so that it is colinear with to.

The rotation is in the plane spanned by the two vectors. Will rotate at most 90 degrees.

The inputs must be unit vectors.

to.dot(from_rotation_arc_colinear(from, to) * from).abs() ≈ 1.

§Panics

Will panic if from or to are not normalized when glam_assert is enabled.

source

pub fn from_rotation_arc_2d(from: DVec2, to: DVec2) -> Self

Gets the minimal rotation for transforming from to to. The resulting rotation is around the z axis. Will rotate at most 180 degrees.

The inputs must be unit vectors.

from_rotation_arc_2d(from, to) * from ≈ to.

For near-singular cases (from≈to and from≈-to) the current implementation is only accurate to about 0.001 (for f32).

§Panics

Will panic if from or to are not normalized when glam_assert is enabled.

source

pub fn to_axis_angle(self) -> (DVec3, f64)

Returns the rotation axis (normalized) and angle (in radians) of self.

source

pub fn to_scaled_axis(self) -> DVec3

Returns the rotation axis scaled by the rotation in radians.

source

pub fn to_euler(self, euler: EulerRot) -> (f64, f64, f64)

Returns the rotation angles for the given euler rotation sequence.

source

pub fn to_array(&self) -> [f64; 4]

[x, y, z, w]

source

pub fn xyz(self) -> DVec3

Returns the vector part of the quaternion.

source

pub fn conjugate(self) -> Self

Returns the quaternion conjugate of self. For a unit quaternion the conjugate is also the inverse.

source

pub fn inverse(self) -> Self

Returns the inverse of a normalized quaternion.

Typically quaternion inverse returns the conjugate of a normalized quaternion. Because self is assumed to already be unit length this method does not normalize before returning the conjugate.

§Panics

Will panic if self is not normalized when glam_assert is enabled.

source

pub fn dot(self, rhs: Self) -> f64

Computes the dot product of self and rhs. The dot product is equal to the cosine of the angle between two quaternion rotations.

source

pub fn length(self) -> f64

Computes the length of self.

source

pub fn length_squared(self) -> f64

Computes the squared length of self.

This is generally faster than length() as it avoids a square root operation.

source

pub fn length_recip(self) -> f64

Computes 1.0 / length().

For valid results, self must not be of length zero.

source

pub fn normalize(self) -> Self

Returns self normalized to length 1.0.

For valid results, self must not be of length zero.

Panics

Will panic if self is zero length when glam_assert is enabled.

source

pub fn is_finite(self) -> bool

Returns true if, and only if, all elements are finite. If any element is either NaN, positive or negative infinity, this will return false.

source

pub fn is_nan(self) -> bool

source

pub fn is_normalized(self) -> bool

Returns whether self of length 1.0 or not.

Uses a precision threshold of 1e-6.

source

pub fn is_near_identity(self) -> bool

source

pub fn angle_between(self, rhs: Self) -> f64

Returns the angle (in radians) for the minimal rotation for transforming this quaternion into another.

Both quaternions must be normalized.

§Panics

Will panic if self or rhs are not normalized when glam_assert is enabled.

source

pub fn abs_diff_eq(self, rhs: Self, max_abs_diff: f64) -> bool

Returns true if the absolute difference of all elements between self and rhs is less than or equal to max_abs_diff.

This can be used to compare if two quaternions contain similar elements. It works best when comparing with a known value. The max_abs_diff that should be used used depends on the values being compared against.

For more see comparing floating point numbers.

source

pub fn lerp(self, end: Self, s: f64) -> Self

Performs a linear interpolation between self and rhs based on the value s.

When s is 0.0, the result will be equal to self. When s is 1.0, the result will be equal to rhs.

§Panics

Will panic if self or end are not normalized when glam_assert is enabled.

source

pub fn slerp(self, end: Self, s: f64) -> Self

Performs a spherical linear interpolation between self and end based on the value s.

When s is 0.0, the result will be equal to self. When s is 1.0, the result will be equal to end.

§Panics

Will panic if self or end are not normalized when glam_assert is enabled.

source

pub fn mul_vec3(self, rhs: DVec3) -> DVec3

Multiplies a quaternion and a 3D vector, returning the rotated vector.

§Panics

Will panic if self is not normalized when glam_assert is enabled.

source

pub fn mul_quat(self, rhs: Self) -> Self

Multiplies two quaternions. If they each represent a rotation, the result will represent the combined rotation.

Note that due to floating point rounding the result may not be perfectly normalized.

§Panics

Will panic if self or rhs are not normalized when glam_assert is enabled.

source

pub fn from_affine3(a: &DAffine3) -> Self

Creates a quaternion from a 3x3 rotation matrix inside a 3D affine transform.

source

pub fn as_quat(self) -> Quat

source

pub fn as_f32(self) -> Quat

👎Deprecated since 0.24.2: Use as_quat() instead

Trait Implementations§

source§

impl Add for DQuat

source§

fn add(self, rhs: Self) -> Self

Adds two quaternions.

The sum is not guaranteed to be normalized.

Note that addition is not the same as combining the rotations represented by the two quaternions! That corresponds to multiplication.

§

type Output = DQuat

The resulting type after applying the + operator.
source§

impl AsRef<[f64; 4]> for DQuat

source§

fn as_ref(&self) -> &[f64; 4]

Converts this type into a shared reference of the (usually inferred) input type.
source§

impl Clone for DQuat

source§

fn clone(&self) -> DQuat

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for DQuat

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for DQuat

source§

fn default() -> Self

Returns the “default value” for a type. Read more
source§

impl<'de> Deserialize<'de> for DQuat

source§

fn deserialize<D>(deserializer: D) -> Result<Self, D::Error>
where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
source§

impl Display for DQuat

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Distribution<DQuat> for Standard

source§

fn sample<R: Rng + ?Sized>(&self, rng: &mut R) -> DQuat

Generate a random value of T, using rng as the source of randomness.
source§

fn sample_iter<R>(self, rng: R) -> DistIter<Self, R, T>
where R: Rng, Self: Sized,

Create an iterator that generates random values of T, using rng as the source of randomness. Read more
source§

fn map<F, S>(self, func: F) -> DistMap<Self, F, T, S>
where F: Fn(T) -> S, Self: Sized,

Create a distribution of values of ‘S’ by mapping the output of Self through the closure F Read more
source§

impl Div<f64> for DQuat

source§

fn div(self, rhs: f64) -> Self

Divides a quaternion by a scalar value. The quotient is not guaranteed to be normalized.

§

type Output = DQuat

The resulting type after applying the / operator.
source§

impl From<DQuat> for [f64; 4]

source§

fn from(q: DQuat) -> Self

Converts to this type from the input type.
source§

impl From<DQuat> for (f64, f64, f64, f64)

source§

fn from(q: DQuat) -> Self

Converts to this type from the input type.
source§

impl From<DQuat> for DVec4

source§

fn from(q: DQuat) -> Self

Converts to this type from the input type.
source§

impl Mul<DVec3> for DQuat

source§

fn mul(self, rhs: DVec3) -> Self::Output

Multiplies a quaternion and a 3D vector, returning the rotated vector.

§Panics

Will panic if self is not normalized when glam_assert is enabled.

§

type Output = DVec3

The resulting type after applying the * operator.
source§

impl Mul<f64> for DQuat

source§

fn mul(self, rhs: f64) -> Self

Multiplies a quaternion by a scalar value.

The product is not guaranteed to be normalized.

§

type Output = DQuat

The resulting type after applying the * operator.
source§

impl Mul for DQuat

source§

fn mul(self, rhs: Self) -> Self

Multiplies two quaternions. If they each represent a rotation, the result will represent the combined rotation.

Note that due to floating point rounding the result may not be perfectly normalized.

§Panics

Will panic if self or rhs are not normalized when glam_assert is enabled.

§

type Output = DQuat

The resulting type after applying the * operator.
source§

impl MulAssign for DQuat

source§

fn mul_assign(&mut self, rhs: Self)

Multiplies two quaternions. If they each represent a rotation, the result will represent the combined rotation.

Note that due to floating point rounding the result may not be perfectly normalized.

§Panics

Will panic if self or rhs are not normalized when glam_assert is enabled.

source§

impl Neg for DQuat

§

type Output = DQuat

The resulting type after applying the - operator.
source§

fn neg(self) -> Self

Performs the unary - operation. Read more
source§

impl PartialEq for DQuat

source§

fn eq(&self, rhs: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<'a> Product<&'a DQuat> for DQuat

source§

fn product<I>(iter: I) -> Self
where I: Iterator<Item = &'a Self>,

Method which takes an iterator and generates Self from the elements by multiplying the items.
source§

impl Product for DQuat

source§

fn product<I>(iter: I) -> Self
where I: Iterator<Item = Self>,

Method which takes an iterator and generates Self from the elements by multiplying the items.
source§

impl Serialize for DQuat

source§

fn serialize<S>(&self, serializer: S) -> Result<S::Ok, S::Error>
where S: Serializer,

Serialize this value into the given Serde serializer. Read more
source§

impl Sub for DQuat

source§

fn sub(self, rhs: Self) -> Self

Subtracts the rhs quaternion from self.

The difference is not guaranteed to be normalized.

§

type Output = DQuat

The resulting type after applying the - operator.
source§

impl<'a> Sum<&'a DQuat> for DQuat

source§

fn sum<I>(iter: I) -> Self
where I: Iterator<Item = &'a Self>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.
source§

impl Sum for DQuat

source§

fn sum<I>(iter: I) -> Self
where I: Iterator<Item = Self>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.
source§

impl Zeroable for DQuat

source§

fn zeroed() -> Self

source§

impl Copy for DQuat

source§

impl Pod for DQuat

Auto Trait Implementations§

§

impl Freeze for DQuat

§

impl RefUnwindSafe for DQuat

§

impl Send for DQuat

§

impl Sync for DQuat

§

impl Unpin for DQuat

§

impl UnwindSafe for DQuat

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CheckedBitPattern for T
where T: AnyBitPattern,

§

type Bits = T

Self must have the same layout as the specified Bits except for the possible invalid bit patterns being checked during is_valid_bit_pattern.
source§

fn is_valid_bit_pattern(_bits: &T) -> bool

If this function returns true, then it must be valid to reinterpret bits as &Self.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for T
where T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> AnyBitPattern for T
where T: Pod,

source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

source§

impl<T> NoUninit for T
where T: Pod,