Trait wgpu_hal::CommandEncoder

source ·
pub trait CommandEncoder: WasmNotSendSync + Debug {
    type A: Api;

Show 43 methods // Required methods unsafe fn begin_encoding( &mut self, label: Label<'_> ) -> Result<(), DeviceError>; unsafe fn discard_encoding(&mut self); unsafe fn end_encoding( &mut self ) -> Result<<Self::A as Api>::CommandBuffer, DeviceError>; unsafe fn reset_all<I>(&mut self, command_buffers: I) where I: Iterator<Item = <Self::A as Api>::CommandBuffer>; unsafe fn transition_buffers<'a, T>(&mut self, barriers: T) where T: Iterator<Item = BufferBarrier<'a, Self::A>>; unsafe fn transition_textures<'a, T>(&mut self, barriers: T) where T: Iterator<Item = TextureBarrier<'a, Self::A>>; unsafe fn clear_buffer( &mut self, buffer: &<Self::A as Api>::Buffer, range: MemoryRange ); unsafe fn copy_buffer_to_buffer<T>( &mut self, src: &<Self::A as Api>::Buffer, dst: &<Self::A as Api>::Buffer, regions: T ) where T: Iterator<Item = BufferCopy>; unsafe fn copy_texture_to_texture<T>( &mut self, src: &<Self::A as Api>::Texture, src_usage: TextureUses, dst: &<Self::A as Api>::Texture, regions: T ) where T: Iterator<Item = TextureCopy>; unsafe fn copy_buffer_to_texture<T>( &mut self, src: &<Self::A as Api>::Buffer, dst: &<Self::A as Api>::Texture, regions: T ) where T: Iterator<Item = BufferTextureCopy>; unsafe fn copy_texture_to_buffer<T>( &mut self, src: &<Self::A as Api>::Texture, src_usage: TextureUses, dst: &<Self::A as Api>::Buffer, regions: T ) where T: Iterator<Item = BufferTextureCopy>; unsafe fn set_bind_group( &mut self, layout: &<Self::A as Api>::PipelineLayout, index: u32, group: &<Self::A as Api>::BindGroup, dynamic_offsets: &[DynamicOffset] ); unsafe fn set_push_constants( &mut self, layout: &<Self::A as Api>::PipelineLayout, stages: ShaderStages, offset_bytes: u32, data: &[u32] ); unsafe fn insert_debug_marker(&mut self, label: &str); unsafe fn begin_debug_marker(&mut self, group_label: &str); unsafe fn end_debug_marker(&mut self); unsafe fn begin_query( &mut self, set: &<Self::A as Api>::QuerySet, index: u32 ); unsafe fn end_query(&mut self, set: &<Self::A as Api>::QuerySet, index: u32); unsafe fn write_timestamp( &mut self, set: &<Self::A as Api>::QuerySet, index: u32 ); unsafe fn reset_queries( &mut self, set: &<Self::A as Api>::QuerySet, range: Range<u32> ); unsafe fn copy_query_results( &mut self, set: &<Self::A as Api>::QuerySet, range: Range<u32>, buffer: &<Self::A as Api>::Buffer, offset: BufferAddress, stride: BufferSize ); unsafe fn begin_render_pass( &mut self, desc: &RenderPassDescriptor<'_, Self::A> ); unsafe fn end_render_pass(&mut self); unsafe fn set_render_pipeline( &mut self, pipeline: &<Self::A as Api>::RenderPipeline ); unsafe fn set_index_buffer<'a>( &mut self, binding: BufferBinding<'a, Self::A>, format: IndexFormat ); unsafe fn set_vertex_buffer<'a>( &mut self, index: u32, binding: BufferBinding<'a, Self::A> ); unsafe fn set_viewport(&mut self, rect: &Rect<f32>, depth_range: Range<f32>); unsafe fn set_scissor_rect(&mut self, rect: &Rect<u32>); unsafe fn set_stencil_reference(&mut self, value: u32); unsafe fn set_blend_constants(&mut self, color: &[f32; 4]); unsafe fn draw( &mut self, first_vertex: u32, vertex_count: u32, first_instance: u32, instance_count: u32 ); unsafe fn draw_indexed( &mut self, first_index: u32, index_count: u32, base_vertex: i32, first_instance: u32, instance_count: u32 ); unsafe fn draw_indirect( &mut self, buffer: &<Self::A as Api>::Buffer, offset: BufferAddress, draw_count: u32 ); unsafe fn draw_indexed_indirect( &mut self, buffer: &<Self::A as Api>::Buffer, offset: BufferAddress, draw_count: u32 ); unsafe fn draw_indirect_count( &mut self, buffer: &<Self::A as Api>::Buffer, offset: BufferAddress, count_buffer: &<Self::A as Api>::Buffer, count_offset: BufferAddress, max_count: u32 ); unsafe fn draw_indexed_indirect_count( &mut self, buffer: &<Self::A as Api>::Buffer, offset: BufferAddress, count_buffer: &<Self::A as Api>::Buffer, count_offset: BufferAddress, max_count: u32 ); unsafe fn begin_compute_pass( &mut self, desc: &ComputePassDescriptor<'_, Self::A> ); unsafe fn end_compute_pass(&mut self); unsafe fn set_compute_pipeline( &mut self, pipeline: &<Self::A as Api>::ComputePipeline ); unsafe fn dispatch(&mut self, count: [u32; 3]); unsafe fn dispatch_indirect( &mut self, buffer: &<Self::A as Api>::Buffer, offset: BufferAddress ); unsafe fn build_acceleration_structures<'a, T>( &mut self, descriptor_count: u32, descriptors: T ) where Self::A: 'a, T: IntoIterator<Item = BuildAccelerationStructureDescriptor<'a, Self::A>>; unsafe fn place_acceleration_structure_barrier( &mut self, barrier: AccelerationStructureBarrier );
}
Expand description

Encoder and allocation pool for CommandBuffers.

A CommandEncoder not only constructs CommandBuffers but also acts as the allocation pool that owns the buffers’ underlying storage. Thus, CommandBuffers must not outlive the CommandEncoder that created them.

The life cycle of a CommandBuffer is as follows:

  • Call Device::create_command_encoder to create a new CommandEncoder, in the “closed” state.

  • Call begin_encoding on a closed CommandEncoder to begin recording commands. This puts the CommandEncoder in the “recording” state.

  • Call methods like copy_buffer_to_buffer, begin_render_pass, etc. on a “recording” CommandEncoder to add commands to the list. (If an error occurs, you must call discard_encoding; see below.)

  • Call end_encoding on a recording CommandEncoder to close the encoder and construct a fresh CommandBuffer consisting of the list of commands recorded up to that point.

  • Call discard_encoding on a recording CommandEncoder to drop the commands recorded thus far and close the encoder. This is the only safe thing to do on a CommandEncoder if an error has occurred while recording commands.

  • Call reset_all on a closed CommandEncoder, passing all the live CommandBuffers built from it. All the CommandBuffers are destroyed, and their resources are freed.

§Safety

  • The CommandEncoder must be in the states described above to make the given calls.

  • A CommandBuffer that has been submitted for execution on the GPU must live until its execution is complete.

  • A CommandBuffer must not outlive the CommandEncoder that built it.

  • A CommandEncoder must not outlive its Device.

It is the user’s responsibility to meet this requirements. This allows CommandEncoder implementations to keep their state tracking to a minimum.

Required Associated Types§

source

type A: Api

Required Methods§

source

unsafe fn begin_encoding(&mut self, label: Label<'_>) -> Result<(), DeviceError>

Begin encoding a new command buffer.

This puts this CommandEncoder in the “recording” state.

§Safety

This CommandEncoder must be in the “closed” state.

source

unsafe fn discard_encoding(&mut self)

Discard the command list under construction.

If an error has occurred while recording commands, this is the only safe thing to do with the encoder.

This puts this CommandEncoder in the “closed” state.

§Safety

This CommandEncoder must be in the “recording” state.

Callers must not assume that implementations of this function are idempotent, and thus should not call it multiple times in a row.

source

unsafe fn end_encoding( &mut self ) -> Result<<Self::A as Api>::CommandBuffer, DeviceError>

Return a fresh CommandBuffer holding the recorded commands.

The returned CommandBuffer holds all the commands recorded on this CommandEncoder since the last call to begin_encoding.

This puts this CommandEncoder in the “closed” state.

§Safety

This CommandEncoder must be in the “recording” state.

The returned CommandBuffer must not outlive this CommandEncoder. Implementations are allowed to build CommandBuffers that depend on storage owned by this CommandEncoder.

source

unsafe fn reset_all<I>(&mut self, command_buffers: I)
where I: Iterator<Item = <Self::A as Api>::CommandBuffer>,

Reclaim all resources belonging to this CommandEncoder.

§Safety

This CommandEncoder must be in the “closed” state.

The command_buffers iterator must produce all the live CommandBuffers built using this CommandEncoder — that is, every extant CommandBuffer returned from end_encoding.

source

unsafe fn transition_buffers<'a, T>(&mut self, barriers: T)
where T: Iterator<Item = BufferBarrier<'a, Self::A>>,

source

unsafe fn transition_textures<'a, T>(&mut self, barriers: T)
where T: Iterator<Item = TextureBarrier<'a, Self::A>>,

source

unsafe fn clear_buffer( &mut self, buffer: &<Self::A as Api>::Buffer, range: MemoryRange )

source

unsafe fn copy_buffer_to_buffer<T>( &mut self, src: &<Self::A as Api>::Buffer, dst: &<Self::A as Api>::Buffer, regions: T )
where T: Iterator<Item = BufferCopy>,

source

unsafe fn copy_texture_to_texture<T>( &mut self, src: &<Self::A as Api>::Texture, src_usage: TextureUses, dst: &<Self::A as Api>::Texture, regions: T )
where T: Iterator<Item = TextureCopy>,

Copy from one texture to another. Works with a single array layer. Note: dst current usage has to be TextureUses::COPY_DST. Note: the copy extent is in physical size (rounded to the block size)

source

unsafe fn copy_buffer_to_texture<T>( &mut self, src: &<Self::A as Api>::Buffer, dst: &<Self::A as Api>::Texture, regions: T )
where T: Iterator<Item = BufferTextureCopy>,

Copy from buffer to texture. Works with a single array layer. Note: dst current usage has to be TextureUses::COPY_DST. Note: the copy extent is in physical size (rounded to the block size)

source

unsafe fn copy_texture_to_buffer<T>( &mut self, src: &<Self::A as Api>::Texture, src_usage: TextureUses, dst: &<Self::A as Api>::Buffer, regions: T )
where T: Iterator<Item = BufferTextureCopy>,

Copy from texture to buffer. Works with a single array layer. Note: the copy extent is in physical size (rounded to the block size)

source

unsafe fn set_bind_group( &mut self, layout: &<Self::A as Api>::PipelineLayout, index: u32, group: &<Self::A as Api>::BindGroup, dynamic_offsets: &[DynamicOffset] )

Sets the bind group at index to group, assuming the layout of all the preceding groups to be taken from layout.

source

unsafe fn set_push_constants( &mut self, layout: &<Self::A as Api>::PipelineLayout, stages: ShaderStages, offset_bytes: u32, data: &[u32] )

Sets a range in push constant data.

IMPORTANT: while the data is passed as words, the offset is in bytes!

§Safety
  • offset_bytes must be a multiple of 4.
  • The range of push constants written must be valid for the pipeline layout at draw time.
source

unsafe fn insert_debug_marker(&mut self, label: &str)

source

unsafe fn begin_debug_marker(&mut self, group_label: &str)

source

unsafe fn end_debug_marker(&mut self)

source

unsafe fn begin_query(&mut self, set: &<Self::A as Api>::QuerySet, index: u32)

§Safety:
source

unsafe fn end_query(&mut self, set: &<Self::A as Api>::QuerySet, index: u32)

§Safety:
source

unsafe fn write_timestamp( &mut self, set: &<Self::A as Api>::QuerySet, index: u32 )

source

unsafe fn reset_queries( &mut self, set: &<Self::A as Api>::QuerySet, range: Range<u32> )

source

unsafe fn copy_query_results( &mut self, set: &<Self::A as Api>::QuerySet, range: Range<u32>, buffer: &<Self::A as Api>::Buffer, offset: BufferAddress, stride: BufferSize )

source

unsafe fn begin_render_pass(&mut self, desc: &RenderPassDescriptor<'_, Self::A>)

source

unsafe fn end_render_pass(&mut self)

source

unsafe fn set_render_pipeline( &mut self, pipeline: &<Self::A as Api>::RenderPipeline )

source

unsafe fn set_index_buffer<'a>( &mut self, binding: BufferBinding<'a, Self::A>, format: IndexFormat )

source

unsafe fn set_vertex_buffer<'a>( &mut self, index: u32, binding: BufferBinding<'a, Self::A> )

source

unsafe fn set_viewport(&mut self, rect: &Rect<f32>, depth_range: Range<f32>)

source

unsafe fn set_scissor_rect(&mut self, rect: &Rect<u32>)

source

unsafe fn set_stencil_reference(&mut self, value: u32)

source

unsafe fn set_blend_constants(&mut self, color: &[f32; 4])

source

unsafe fn draw( &mut self, first_vertex: u32, vertex_count: u32, first_instance: u32, instance_count: u32 )

source

unsafe fn draw_indexed( &mut self, first_index: u32, index_count: u32, base_vertex: i32, first_instance: u32, instance_count: u32 )

source

unsafe fn draw_indirect( &mut self, buffer: &<Self::A as Api>::Buffer, offset: BufferAddress, draw_count: u32 )

source

unsafe fn draw_indexed_indirect( &mut self, buffer: &<Self::A as Api>::Buffer, offset: BufferAddress, draw_count: u32 )

source

unsafe fn draw_indirect_count( &mut self, buffer: &<Self::A as Api>::Buffer, offset: BufferAddress, count_buffer: &<Self::A as Api>::Buffer, count_offset: BufferAddress, max_count: u32 )

source

unsafe fn draw_indexed_indirect_count( &mut self, buffer: &<Self::A as Api>::Buffer, offset: BufferAddress, count_buffer: &<Self::A as Api>::Buffer, count_offset: BufferAddress, max_count: u32 )

source

unsafe fn begin_compute_pass( &mut self, desc: &ComputePassDescriptor<'_, Self::A> )

source

unsafe fn end_compute_pass(&mut self)

source

unsafe fn set_compute_pipeline( &mut self, pipeline: &<Self::A as Api>::ComputePipeline )

source

unsafe fn dispatch(&mut self, count: [u32; 3])

source

unsafe fn dispatch_indirect( &mut self, buffer: &<Self::A as Api>::Buffer, offset: BufferAddress )

source

unsafe fn build_acceleration_structures<'a, T>( &mut self, descriptor_count: u32, descriptors: T )
where Self::A: 'a, T: IntoIterator<Item = BuildAccelerationStructureDescriptor<'a, Self::A>>,

To get the required sizes for the buffer allocations use get_acceleration_structure_build_sizes per descriptor All buffers must be synchronized externally All buffer regions, which are written to may only be passed once per function call, with the exception of updates in the same descriptor. Consequences of this limitation:

  • scratch buffers need to be unique
  • a tlas can’t be build in the same call with a blas it contains
source

unsafe fn place_acceleration_structure_barrier( &mut self, barrier: AccelerationStructureBarrier )

Object Safety§

This trait is not object safe.

Implementors§

source§

impl CommandEncoder for Encoder

§

type A = Api

source§

impl CommandEncoder for wgpu_hal::gles::CommandEncoder

§

type A = Api

source§

impl CommandEncoder for wgpu_hal::vulkan::CommandEncoder

§

type A = Api