Struct ImpulseJointImpulses 

pub struct ImpulseJointImpulses {
    pub linear: Vect,
    pub angular: AngVector,
    pub limits: [Real; 6],
    pub motors: [Real; 6],
}

The impulses applied by an ImpulseJoint during the last simulation step.

This component is automatically added alongside ImpulseJoint and updated after each simulation step. Comparing these impulses with a threshold can be used to implement breakable joints (by removing the ImpulseJoint once the threshold is exceeded).

All impulses are expressed along the axes of the joint frame attached to the first rigid-body. Divide them by the (sub)step length to get the corresponding forces.

Fields

linear: Vect

The impulse applied along the locked translational degrees of freedom.

angular: AngVector

The angular impulse applied along the locked rotational degrees of freedom.

limits: [Real; 6]

The impulse applied by the limits along each degree of freedom (see JointAxis).

motors: [Real; 6]

The impulse applied by the motors along each degree of freedom (see JointAxis).

Implementations

impl ImpulseJointImpulses

pub fn from_rapier(joint: &RapierImpulseJoint) -> Self

Reads the impulses applied by the given Rapier impulse joint.

Trait Implementations

impl Clone for ImpulseJointImpulses

fn clone(&self) -> ImpulseJointImpulses

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Component for ImpulseJointImpulses

where Self: Send + Sync + 'static,

const STORAGE_TYPE: StorageType = ::bevy::ecs::component::StorageType::Table

A constant indicating the storage type used for this component.

type Mutability = Mutable

A marker type to assist Bevy with determining if this component is mutable, or immutable. Mutable components will have Component<Mutability = Mutable>, while immutable components will instead have Component<Mutability = Immutable>.

fn register_required_components( _requiree: ComponentId, required_components: &mut RequiredComponentsRegistrator<'_, '_>, )

Registers required components.

fn clone_behavior() -> ComponentCloneBehavior

Called when registering this component, allowing to override clone function (or disable cloning altogether) for this component.

fn relationship_accessor() -> Option<ComponentRelationshipAccessor<Self>>

Returns ComponentRelationshipAccessor required for working with relationships in dynamic contexts.

fn on_add() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_add ComponentHook for this Component if one is defined.

fn on_insert() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_insert ComponentHook for this Component if one is defined.

fn on_discard() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_discard ComponentHook for this Component if one is defined.

fn on_remove() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_remove ComponentHook for this Component if one is defined.

fn on_despawn() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_despawn ComponentHook for this Component if one is defined.

fn map_entities<E>(_this: &mut Self, _mapper: &mut E)

where E: EntityMapper,

Maps the entities on this component using the given EntityMapper. This is used to remap entities in contexts like scenes and entity cloning. When deriving Component, this is populated by annotating fields containing entities with #[entities]

const HAS_SUMMARY_TICK: bool = false

Set this constant to true if the component should track a summary tick.

impl Copy for ImpulseJointImpulses

impl Debug for ImpulseJointImpulses

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ImpulseJointImpulses

fn default() -> ImpulseJointImpulses

Returns the “default value” for a type.

impl FromReflect for ImpulseJointImpulses

fn from_reflect(reflect: &dyn PartialReflect) -> Option<Self>

Constructs a concrete instance of Self from a reflected value.

fn take_from_reflect( reflect: Box<dyn PartialReflect>, ) -> Result<Self, Box<dyn PartialReflect>>

Attempts to downcast the given value to Self using, constructing the value using from_reflect if that fails.

impl GetTypeRegistration for ImpulseJointImpulses

fn get_type_registration() -> TypeRegistration

Returns the default TypeRegistration for this type.

fn register_type_dependencies(registry: &mut TypeRegistry)

Registers other types needed by this type.

impl PartialEq for ImpulseJointImpulses

fn eq(&self, other: &ImpulseJointImpulses) -> bool

Equality operator ==.

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=.

impl PartialReflect for ImpulseJointImpulses

fn get_represented_type_info(&self) -> Option<&'static TypeInfo>

Returns the TypeInfo of the type represented by this value.

fn try_apply(&mut self, value: &dyn PartialReflect) -> Result<(), ApplyError>

Tries to apply a reflected value to this value.

fn reflect_kind(&self) -> ReflectKind

Returns a zero-sized enumeration of “kinds” of type.

fn reflect_ref(&self) -> ReflectRef<'_>

Returns an immutable enumeration of “kinds” of type.

fn reflect_mut(&mut self) -> ReflectMut<'_>

Returns a mutable enumeration of “kinds” of type.

fn reflect_owned(self: Box<Self>) -> ReflectOwned

Returns an owned enumeration of “kinds” of type.

fn try_into_reflect( self: Box<Self>, ) -> Result<Box<dyn Reflect>, Box<dyn PartialReflect>>

Attempts to cast this type to a boxed, fully-reflected value.

fn try_as_reflect(&self) -> Option<&dyn Reflect>

Attempts to cast this type to a fully-reflected value.

fn try_as_reflect_mut(&mut self) -> Option<&mut dyn Reflect>

Attempts to cast this type to a mutable, fully-reflected value.

fn into_partial_reflect(self: Box<Self>) -> Box<dyn PartialReflect>

Casts this type to a boxed, reflected value.

fn as_partial_reflect(&self) -> &dyn PartialReflect

Casts this type to a reflected value.

fn as_partial_reflect_mut(&mut self) -> &mut dyn PartialReflect

Casts this type to a mutable, reflected value.

fn reflect_partial_eq(&self, value: &dyn PartialReflect) -> Option<bool>

Returns a “partial equality” comparison result.

fn reflect_partial_cmp(&self, value: &dyn PartialReflect) -> Option<Ordering>

Returns a “partial comparison” result.

fn reflect_clone(&self) -> Result<Box<dyn Reflect>, ReflectCloneError>

Attempts to clone Self using reflection.

fn apply(&mut self, value: &(dyn PartialReflect + 'static))

Applies a reflected value to this value.

fn to_dynamic(&self) -> Result<Box<dyn PartialReflect>, ReflectCloneError>

Converts this reflected value into its dynamic representation based on its kind.

fn reflect_clone_and_take<T>(&self) -> Result<T, ReflectCloneError>

where T: 'static, Self: Sized + TypePath,

For a type implementing PartialReflect, combines reflect_clone and take in a useful fashion, automatically constructing an appropriate ReflectCloneError if the downcast fails.

fn reflect_hash(&self) -> Option<u64>

Returns a hash of the value (which includes the type).

fn debug(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Debug formatter for the value.

fn is_dynamic(&self) -> bool

Indicates whether or not this type is a dynamic type.

impl Reflect for ImpulseJointImpulses

fn into_any(self: Box<Self>) -> Box<dyn Any>

Returns the value as a Box<dyn Any>.

fn as_any(&self) -> &dyn Any

Returns the value as a &dyn Any.

fn as_any_mut(&mut self) -> &mut dyn Any

Returns the value as a &mut dyn Any.

fn into_reflect(self: Box<Self>) -> Box<dyn Reflect>

Casts this type to a boxed, fully-reflected value.

fn as_reflect(&self) -> &dyn Reflect

Casts this type to a fully-reflected value.

fn as_reflect_mut(&mut self) -> &mut dyn Reflect

Casts this type to a mutable, fully-reflected value.

fn set(&mut self, value: Box<dyn Reflect>) -> Result<(), Box<dyn Reflect>>

Performs a type-checked assignment of a reflected value to this value.

impl Struct for ImpulseJointImpulses

fn field(&self, name: &str) -> Option<&dyn PartialReflect>

Gets a reference to the value of the field named name as a &dyn PartialReflect.

fn field_mut(&mut self, name: &str) -> Option<&mut dyn PartialReflect>

Gets a mutable reference to the value of the field named name as a &mut dyn PartialReflect.

fn field_at(&self, index: usize) -> Option<&dyn PartialReflect>

Gets a reference to the value of the field with index index as a &dyn PartialReflect.

fn field_at_mut(&mut self, index: usize) -> Option<&mut dyn PartialReflect>

Gets a mutable reference to the value of the field with index index as a &mut dyn PartialReflect.

fn name_at(&self, index: usize) -> Option<&str>

Gets the name of the field with index index.

fn index_of_name(&self, name: &str) -> Option<usize>

Gets the index of the field with the given name.

fn field_len(&self) -> usize

Returns the number of fields in the struct.

fn iter_fields(&self) -> FieldIter<'_>

Returns an iterator over the values of the reflectable fields for this struct.

fn to_dynamic_struct(&self) -> Result<DynamicStruct, ReflectCloneError>

Creates a new DynamicStruct from this struct.

fn get_represented_struct_info(&self) -> Option<&'static StructInfo>

Will return None if TypeInfo is not available.

impl StructuralPartialEq for ImpulseJointImpulses

impl TypePath for ImpulseJointImpulses

fn type_path() -> &'static str

Returns the fully qualified path of the underlying type.

fn short_type_path() -> &'static str

Returns a short, pretty-print enabled path to the type.

fn type_ident() -> Option<&'static str>

Returns the name of the type, or None if it is anonymous.

fn crate_name() -> Option<&'static str>

Returns the name of the crate the type is in, or None if it is anonymous.

fn module_path() -> Option<&'static str>

Returns the path to the module the type is in, or None if it is anonymous.

impl Typed for ImpulseJointImpulses

fn type_info() -> &'static TypeInfo

Returns the compile-time info for the underlying type.